基于同轴图像传感的激光焊接过程质量监测技术

针对激光焊接过程中由于参数不匹配、装配误差等原因造成的焊接过程不稳定等焊接缺陷，基于同轴图像传感技术，建立起一套激光焊接过程中的质量在线监测系统，对焊接过程中的熔池图像进行了采集分析及其熔池特征信息的提取. 结果表明，在激光功率为1 500 W的不等厚不锈钢薄板激光焊接试验条件下，焊接过程中的不稳定、下塌缺陷以及焊偏现象与熔池形状各特征信息变化具有一定的相关性. 结合BP神经网络算法对所提特征信息进行分类、识别，基于LabVIEW软件平台，可实现相应缺陷的自动化识别及报警功能.     

Weighted preliminary-summation-based principal component analysis for non-Gaussian processes

For industrial chemical process, preliminary-summation-based principal component analysis (PS-PCA), an amended PCA method was recently provided for coping with both Gaussian and non-Gaussian characteristics. By summing the training and monitoring data respectively, PS-PCA is capable of resolving the issue of non-Gaussian processes and achieves higher fault detection rate than the traditional PCA. However, in the PS-PCA summation operation, all data samples are regarded as the same weight, which results in the fault information of newly-samples may be diluted, leading to significant detection delays. To address this challenge, in this paper, we propose a novel weighted PS-PCA (WPS-PCA) method that employs an exponential weighting scheme to put more emphasis on recent information. Subsequently, a mathematical argument demonstrates that when the number of variables is enough plentiful, the obtained summation combined with the generalized central limit theorem conforms to approximately a Gaussian distribution. The kurtosis relationships indicate this conversion will bring out well-pleasing feasibility for conventional PCA. Ultimately, the proposed technique verifies detection performance using the Tennessee Eastman process, which is compared with the existing PCA and PS-PCA schemes, in terms of the fault detection time and fault detection rate. The simulation studies reveal that the proposed method is efficient and superior.     

载荷影响下的机电阻抗协整结构损伤识别方法

高频机电阻抗(electromechanical impedance, 简称EMI)方法利用粘贴在结构表面的压电传感器(piezoelectric transducer, 简称PZT)进行主动激励，通过连续监测和分析PZT机电导纳信号的变化评估结构的健康状态；然而EMI方法容易受到环境工况变化的影响，导致结构损伤的误报。针对此问题，采用时间序列协整方法处理及消除结构工作载荷对阻抗谱特征信号的影响。该方法是基于结构动荷载作用下PZT阻抗谱导纳信号的非平稳特征，将动荷载影响下的阻抗谱非平稳时间序列经线性组合变换成平稳时间序列，根据得到的协整余量序列有效判断结构的健康状态。为验证该方法的有效性，开展了动应力影响下铝梁结构的螺栓松动损伤识别实验。结果表明，协整消除了动态应力对EMI方法的影响，当铝梁内存在持续变化的应力时，仍可以准确识别螺栓松动。机电阻抗协整方法能够消除结构健康监测中荷载作用的影响，及时准确地进行结构损伤识别。     

基于FAHP的机械振动WSN均衡拓扑构建方法

针对机械振动无线传感器网络因拓扑不均衡导致传输时延和网络传输能耗增加的问题,提出了一种基于模糊层次分析(fuzzy analytic hierarchy process,简称FAHP)的均衡拓扑构建方法,该方法由构建模糊判断矩阵和计算权重向量组成。首先,传感器节点进行簇内通信获取信标广播信息,将信标节点网络决策因子统一量纲化,利用网络决策因子构建模糊判断矩阵;其次,检验模糊判断矩阵一致性,采用行和归一化处理或拉格朗日最小二乘法计算权重向量;最后,传感器节点通过权重向量计算出各个信标节点综合权值,关联最优信标节点为父节点加入网络,将提出的模糊层次分析拓扑构建方法与基于链路质量单准则构建网络拓扑机制进行对比。实验结果表明,该方法能有效改善传输时延和机械振动无线传感器节点网络寿命。     

龙滩坝8#采场地压监测与结果分析

为掌握龙滩坝8#采场矿体在开采过程中地压的变化规律，在结合现场实际情况的同时，根据开挖揭露的地质条件，采用钻孔应力计、锚杆应力计、收敛计、多点位移计和声发射对采场矿柱、顶板及巷道变形情况进行监测，得到回采过程中矿柱、顶板、巷道的受力状况。掌握采场地压的变化规律，为矿体的开采设计提供参考。     

Spiraling elliptic breathers in nonlocal nonlinear media with linear anisotropy

The dynamical properties of spiraling elliptic breathers in nonlocal nonlinear media with linear anisotropy are analytically discussed. Using a two-dimensional asynchronous fractional Fourier transform, the exact analytical solutions of spiraling elliptic breathers are obtained to the nonlocal nonlinear Schrödinger equation with unequal diffraction coefficients in the highly nonlocal limit. It is found that the spiraling elliptic breathers exhibit a kind of molecule-like libration due to the combined effects of the linear anisotropy and the orbital angular momentum. The angular velocity of the spiraling elliptic breathers is discussed, which can be controlled by the linear anisotropy parameter. In the media with linear anisotropy such as uniaxial crystals, the angular velocity of the spiraling elliptic breathers can be controlled by changing the propagation directions of optical beams. Furthermore, the nonlinearity of media is found to enhance the rotation effect of spiraling elliptic breathers.     

基于现场监测与数值模拟的浅层采空区稳定性分析

隐患采空区是目前影响露天开采矿山安全生产的主要危害源之一。随着台阶开采的不断剥离,露天开采境界内各台阶与地下空区群的隔离层厚度越来越薄,随时有可能发生采空区顶板坍塌事故。考虑到露天矿采空区地质赋存条件和围岩稳固性等特征,以弓长岭露天铁矿浅层采空区为工程背景,运用现场监测和数值模拟相结合的手段综合分析了浅层采空区的稳定性。将液体静力水准地表沉降监测系统的监测数据与FLAC数值模拟结果对比,调整蠕变参数使得数值模拟的蠕变速率与现场监测结果一致,而后据此进行未来结果的预测。最终根据地表沉降数据确定的蠕变参数取值为A=1.0×10^-12、m=1.75、n=0.35。研究表明:静力水准测点地表最大沉降位移为-9.8 mm,蠕变计算结果顶板最大垂直位移约20.4 mm,应力最大值约25 MPa,综合分析显示该采空区较稳定。上述研究提供了一种基于采空区现场监测数据的数值模拟蠕变分析方法,可为类似矿山采空区稳定性分析提供借鉴。     

煤矿井下风水管路压力在线监测系统的研究与应用

为提高井下管路供风、供水的安全性、可靠性，以工业环网作为网络通信平台，通过分站采集数据上传至地面，实现对煤矿井下供风、供水管道的远程实时监控及远程控制，及时发现管网故障，提高维护效率、降低损失，保障供风、供水质量，达到科学预警、降低成本、提高效率的目的。     

Flame Front Deformation Instabilities of Filtration Combustion for Initial Thermal Perturbation

The flame front deformation instability of low-velocity filtration combustion within an inert packed bed is studied based on the initial preheating non-uniformity. Based on the experimental phenomena, an initial thermal perturbation model is numerically proposed so as to predict the deformation behaviors of the flame front instabilities. The numerical prediction indicates that the assumption of an initial thermal perturbation is a feasible explanation as the cause of the flame front inclination instability. As the initial thermal perturbation increases, the phenomena of the flame front break and shrinking instabilities could easily occur at high filtration velocity or low equivalence ratio. Moreover, the evolutions of the flame front break rate and the shrinking rate are quantitatively analyzed.